ML5

Cabinet:

Composite 18 to 36mm HDF laminated to 4mm sprung steel plate. Differential Cancellation bracing utilising 25mm hardwood dowel, 13mm steel rod and 18mm Birch Plywood.

Crossover construction:

Full hardwired hand build, all joints are high pressure low contact area cold weld sealed with Teflon amalgamated wrap. 12awg air cored inductors, low tension hand wound double stabilised. Metalised Polypropylene 250volt base capacitor utilising Copper Film and Foil Bypass capacitors Dale Vishay 13watt wire wound and 10watt Mundorf Metal Oxide resistors. Proprietary integration of enclosure substrate steel plate with Crossover network ground planes.

Tweeter: 1 inch chambered textile dome. Mid-bass driver: 8 inch Nomex Diaphragm. Wiring: Solid Core OFC copper 2 and 4 strand depending on circuit location. Input connection: Solid copper binding posts. Frequency response: 25hz to 25khz +/- 1.5db (in room). Sensitivity: 88dB @ 2.83V/m . Impedance: 8ohms nominal. Recommended amplifier power: 20-500W . Cabinet dimensions (HxWxD): 1000 x 244 x 450mm . Weight (per speaker): 80kg’s (176lbs).

All specifications may be subject to change without notice. Each pair of ML3 are stringently tested, then hand tuned.

Reference upgrades

The ML5 can have substantial upgraded sonic performance by upgrading key components in the crossover circuit. Obviously like upgrading a car's engine internals, the performance benefits are not seen, it is to be experienced.

Flexible Layouts

Gantry 5 benefits from a flexible and intuitive, drag & drop layout manager. You can add as many rows and blocks to each section as you desire, and configure their distance to intervals of 1%.

Each block has individual controls, such as an autocomplete select box for box variations, as well as individual CSS fields.

© 2018 by Lenehan Audio.